This brings notes merge in line with regular merge's behaviour.
This patch has been improved by the following contributions:
- Ævar Arnfjörð Bjarmason: Don't use C99 comments.
Thanks-to: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the notes merge conflicts in .git/NOTES_MERGE_WORKTREE have been
resolved, we need to record a new notes commit on the appropriate notes
ref with the resolved notes.
This patch implements 'git notes merge --commit' which the user should
run after resolving conflicts in the notes merge worktree. This command
finalizes the notes merge by recombining the partial notes tree from
part 1 with the now-resolved conflicts in the notes merge worktree in a
merge commit, and updating the appropriate ref to this merge commit.
In order to correctly finalize the merge, we need to keep track of three
things:
- The partial merge result from part 1, containing the auto-merged notes.
This is now stored into a ref called .git/NOTES_MERGE_PARTIAL.
- The unmerged notes. These are already stored in
.git/NOTES_MERGE_WORKTREE, thanks to part 1.
- The notes ref to be updated by the finalized merge result. This is now
stored in a symref called .git/NOTES_MERGE_REF.
In addition to "git notes merge --commit", which uses the above details
to create the finalized notes merge commit, this patch also implements
"git notes merge --reset", which aborts the ongoing notes merge by simply
removing the files/directory described above.
FTR, "git notes merge --commit" reuses "git notes merge --reset" to remove
the information described above (.git/NOTES_MERGE_*) after the notes merge
have been successfully finalized.
The patch also contains documentation and testcases for the two new options.
This patch has been improved by the following contributions:
- Ævar Arnfjörð Bjarmason: Fix nonsense sentence in --commit description
- Sverre Rabbelier: Rename --reset to --abort
Thanks-to: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Thanks-to: Sverre Rabbelier <srabbelier@gmail.com>
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Conflicts (that are to be resolved manually) are written into a special-
purpose working tree, located at .git/NOTES_MERGE_WORKTREE. Within this
directory, conflicting notes entries are stored (with conflict markers
produced by ll_merge()) using the SHA1 of the annotated object. The
.git/NOTES_MERGE_WORKTREE directory will only contain the _conflicting_
note entries. The non-conflicting note entries (aka. the partial merge
result) are stored in 'local_tree', and the SHA1 of the resulting commit
is written to 'result_sha1'. The return value from notes_merge() is -1.
The user is told to edit the files within the .git/NOTES_MERGE_WORKTREE
directory in order to resolve the conflicts.
The patch also contains documentation and testcases for the correct setup
of .git/NOTES_MERGE_WORKTREE.
The next part will recombine the partial notes merge result with the
resolved conflicts in .git/NOTES_MERGE_WORKTREE to produce the complete
merge result.
This patch has been improved by the following contributions:
- Jonathan Nieder: Use trace_printf(...) instead of OUTPUT(o, 5, ...)
Thanks-to: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The new -s/--strategy command-line option to 'git notes merge' allow the user
to choose how notes merge conflicts should be resolved. There are four valid
strategies to choose from:
1. "manual" (the default): This will let the user manually resolve conflicts.
This option currently fails with an error message. It will be implemented
properly in future patches.
2. "ours": This automatically chooses the local version of a conflict, and
discards the remote version.
3. "theirs": This automatically chooses the remote version of a conflict, and
discards the local version.
4. "union": This automatically resolves the conflict by appending the remote
version to the local version.
The strategies are implemented using the combine_notes_* functions from the
notes.h API.
The patch also includes testcases verifying the correct implementation of
these strategies.
This patch has been improved by the following contributions:
- Jonathan Nieder: Future-proof by always checking add_note() return value
- Stephen Boyd: Use test_commit
- Stephen Boyd: Use correct option name
Thanks-to: Jonathan Nieder <jrnieder@gmail.com>
Thanks-to: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This continuation of the 'git notes merge' implementation teaches notes-merge
to properly do real merges between notes trees: Two diffs are performed, one
from $base to $remote, and another from $base to $local. The paths in each
diff are normalized to SHA1 object names. The two diffs are then consolidated
into a single list of change pairs to be evaluated. Each change pair consist
of:
- The annotated object's SHA1
- The $base SHA1 (i.e. the common ancestor notes for this object)
- The $local SHA1 (i.e. the current notes for this object)
- The $remote SHA1 (i.e. the to-be-merged notes for this object)
From the pair ($base -> $local, $base -> $remote), we can determine the merge
result using regular 3-way rules. If conflicts are encountered in this
process, we fail loudly and exit (conflict handling to be added in a future
patch), If we can complete the merge without conflicts, the resulting
notes tree is committed, and the current notes ref updated.
The patch includes added testcases verifying that we can successfully do real
conflict-less merges.
This patch has been improved by the following contributions:
- Jonathan Nieder: Future-proof by always checking add_note() return value
- Stephen Boyd: Use test_commit
- Jonathan Nieder: Use trace_printf(...) instead of OUTPUT(o, 5, ...)
- Junio C Hamano: fixup minor style issues
Thanks-to: Jonathan Nieder <jrnieder@gmail.com>
Thanks-to: Stephen Boyd <bebarino@gmail.com>
Thanks-to: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This initial implementation of 'git notes merge' only handles the trivial
merge cases (i.e. where the merge is either a no-op, or a fast-forward).
The patch includes testcases for these trivial merge cases.
Future patches will extend the functionality of 'git notes merge'.
This patch has been improved by the following contributions:
- Stephen Boyd: Simplify argc logic
- Stephen Boyd: Use test_commit
- Ævar Arnfjörð Bjarmason: Don't use C99 comments.
- Jonathan Nieder: Add constants for common verbosity values
- Jonathan Nieder: Use trace_printf(...) instead of OUTPUT(o, 5, ...)
- Jonathan Nieder: Remove extraneous show() function
- Jonathan Nieder: Clarify handling of empty/missing notes ref in notes_merge()
- Junio C Hamano: fixup minor style issues
Thanks-to: Stephen Boyd <bebarino@gmail.com>
Thanks-to: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Thanks-to: Jonathan Nieder <jrnieder@gmail.com>
Thanks-to: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When using combine_notes_concatenate() to concatenate notes, it currently
ensures exactly one newline character between the given notes. However,
when using builtin/notes.c:create_note() to concatenate notes (e.g. by
'git notes append'), it adds a newline character to the trailing newline
of the preceding notes object, thus resulting in _two_ newlines (aka. a
blank line) separating contents of the two notes.
This patch brings combine_notes_concatenate() into consistency with
builtin/notes.c:create_note(), by ensuring exactly _two_ newline characters
between concatenated notes.
The patch also changes a few notes-related selftests accordingly.
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The rest of the file uses tabs for indenting. Fix the one function
that doesn't.
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the authentification initialisation to percent-decode username
and password for HTTP URLs.
Signed-off-by: Gabriel Corona <gabriel.corona@enst-bretagne.fr>
Acked-by: Tay Ray Chuan <rctay89@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a test for HTTP authentication and proper percent-decoding of the
userinfo (username and password) part of the URL.
Signed-off-by: Gabriel Corona <gabriel.corona@enst-bretagne.fr>
Acked-by: Tay Ray Chuan <rctay89@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A user may want different pager settings or even a
different pager for various subcommands (e.g., because they
use different less settings for "log" vs "diff", or because
they have a pager that interprets only log output but not
other commands).
This patch extends the pager.<cmd> syntax to support not
only boolean to-page-or-not-to-page, but also to specify a
pager just for a specific command.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We explicitly document "0" and "1" as synonyms for "false"
and "true" in boolean config options. However, we don't
actually handle those values in git_config_maybe_bool.
In most cases this works fine, as we call git_config_bool,
which in turn calls git_config_bool_or_int, which in turn
calls git_config_maybe_bool. Values of 0/1 are considered
"not bool", but their integer values end up being converted
to the corresponding boolean values.
However, the log.decorate code looks for maybe_bool
explicitly, so that it can fall back to the "short" and
"full" strings. It does not handle 0/1 at all, and considers
them invalid values.
We cannot simply add 0/1 support to git_config_maybe_bool.
That would confuse git_config_bool_or_int, which may want to
distinguish the integer values "0" and "1" from bools.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
An aborted merge prints the list of rejected paths as part of the
error message. Since commit f66caaf9 (do not overwrite files in
leading path), some of those paths do not have static buffers, so
we have to keep a copy. Use string_list's to accomplish this.
This changes the order of the list to the order in which the paths
are processed. Previously, it was reversed.
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In case HEAD does not point to a valid commit yet, merge is
implemented as a hard reset. This will cause untracked files to be
overwritten.
Instead, assume the empty tree for HEAD and do a regular merge. An
untracked file will cause the merge to abort and do nothing. If no
conflicting files are present, the merge will have the same effect
as a hard reset.
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change submodule tests that piped to diff(1) to use test_cmp. The
resulting unified diff is easier to read.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Split the "message in editor has initial comment" test into three
tests. The motivation is to be able to only skip the middle part under
NO_GETTEXT_POISON.
In addition the return value of 'git tag' was being returned. We now
check that it's non-zero. I used ! instead of test_must_fail so that
the GIT_EDITOR variable was only used in this command invocation, and
because the surrounding tests use this style.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The new boolean "fetchRecurseSubmodules" config option controls the
behavior for "git fetch" and "git pull". It specifies if these commands
should recurse into submodules and fetch new commits there too and can be
set separately for each submodule.
In the .gitmodules file "submodule.<name>.fetchRecurseSubmodules" entries
are read before looking for them in .git/config. Thus settings found in
.git/config will override those from .gitmodules, thereby allowing the
user to ignore settings given by the remote side while also letting
upstream set reasonable defaults for those users who don't have special
needs.
This configuration can be overridden by the command line option
"--[no-]recurse-submodules" of "git fetch" and "git pull".
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This new boolean option can be used to override the default for "git
fetch" and "git pull", which is to not recurse into populated submodules
and fetch all new commits there too.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Until now you had to call "git submodule update" (without -N|--no-fetch
option) or something like "git submodule foreach git fetch" to fetch
new commits in populated submodules from their remote.
This could lead to "(commits not present)" messages in the output of
"git diff --submodule" (which is used by "git gui" and "gitk") after
fetching or pulling new commits in the superproject and is an obstacle for
implementing recursive checkout of submodules. Also "git submodule
update" cannot fetch changes when disconnected, so it was very easy to
forget to fetch the submodule changes before disconnecting only to
discover later that they are needed.
This patch adds the "--recurse-submodules" option to recursively fetch
each populated submodule from the url configured in the .git/config of the
submodule at the end of each "git fetch" or during "git pull" in the
superproject. The submodule paths are taken from the index.
The hidden option "--submodule-prefix" is added to "git fetch" to be able
to print out the full paths of nested submodules.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When an initial --in-reply-to is supplied, make it apply only to the
first message; --[no-]chain-reply-to setting are honored by second and
subsequent messages; this is also how the git-format-patch option with
the same name behaves.
Moreover, when $initial_reply_to is asked to the user interactively it
is asked as the "Message-ID to be used as In-Reply-To for the _first_
email", this makes the user think that the second and subsequent
patches are not using it but are considered as replies to the first
message or chained according to the --[no-]chain-reply setting.
Look at the v2 series in the illustration to see what the new behavior
ensures:
(before the patch) | (after the patch)
[PATCH 0/2] Here is what I did... | [PATCH 0/2] Here is what I did...
[PATCH 1/2] Clean up and tests | [PATCH 1/2] Clean up and tests
[PATCH 2/2] Implementation | [PATCH 2/2] Implementation
[PATCH v2 0/3] Here is a reroll | [PATCH v2 0/3] Here is a reroll
[PATCH v2 1/3] Clean up | [PATCH v2 1/3] Clean up
[PATCH v2 2/3] New tests | [PATCH v2 2/3] New tests
[PATCH v2 3/3] Implementation | [PATCH v2 3/3] Implementation
This is the typical behaviour we want when we send a series with cover
letter in reply to some discussion, the new patch series should appear
as a separate subtree in the discussion.
Also update the documentation on --in-reply-to to describe the new
behavior.
Signed-off-by: Antonio Ospite <ospite@studenti.unina.it>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We have always been creating rfc1991 signatures for users with "rfc1991"
in their gpg config but failed to recognize them (tag -l -n largenumber)
and verify them (tag -v, verify-tag).
Make good use of the refactored signature detection and let us recognize
and verify those signatures also.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, git expects "-----BEGIN PGP SIGNATURE-----" at the beginning of a
signature. But gpg uses "MESSAGE" instead of "SIGNATURE" when used with
the "rfc1991" option. This leads to git's failing to verify it's own
signed tags, among other problems.
Add tests for all code paths (tag -v, tag -l -n largenumber, tag -f
without -m) where signature detection matters.
Reported-by: Stephan Hugel <urschrei@gmail.com>
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A stat-dirty index is not a detail that ought to concern the operator
of porcelain such as "git cherry-pick".
Without this change, a cherry-pick after copying a worktree with rsync
errors out with a misleading message.
$ git cherry-pick build/top
error: Your local changes to 'file.h' would be overwritten by merge. Aborting.
Please, commit your changes or stash them before you can merge.
Noticed-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some patches have a timezone formatted like '-08:00' instead of
'-0800' in their ---/+++ lines (e.g. http://lwn.net/Articles/131729/).
Take this into account when searching for the start of the timezone
(which is the end of the filename).
This does not actually affect the outcome of patching unless (1) a
file being patched has a non-' ' whitespace character (e.g., tab) in
its filename, or (2) the patch is whitespace-damaged, so the tab
between filename and timestamp has been replaced with spaces.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use test_might_fail instead of ignoring the exit status from git
config --unset, and let the exit status propagate past rm -f (which
does not fail on ENOENT). Otherwise bugs that lead git config to
crash would not be detected when this test runs.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The same code to check the position of HEAD is used by several
tests in this script. Factor it out as a function and simplify it.
Noticed using an &&-chaining tester, because the current code
does not propagate the precise exit status from errors.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a comment describing the setup in t3404 to its --help output.
This should make it easier to decide where to put new functions
without disrupting the flow of the file or obstructing the description
of the test setup.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allow test_commit failures in loop iterations before the last one to
cause the test assertion to fail.
More importantly, avoiding these loops makes the test a little
simpler to read and decreases the vertical screen footprint of
the setup test assertion by one line.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use the test_expect_code helper instead of open-coding it.
The main behavior change is to print the command and actual exit
status when the test fails. More importantly, this would make it
easier to add commands before "git notes show" as part of the
same test assertion if needed.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As t/README explains:
When a gitcommand dies due to a segfault, test_must_fail
diagnoses it as an error; "! git <command>" treats it as
just another expected failure, which would let such a bug
go unnoticed.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
rev-parse --parseopt exits with code 129 (usage error) when asked
to dump usage with -h on behalf of another command. Scripts can
take advantage of this to avoid trying to parse usage information
as though it were the regular output from some git command.
Noticed with an &&-chaining tester.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Using 'return' in an attempt to end a test assertion can have
unpredictable results (probably escaping from test_run_ and breaking
its bookkeeping). Redo the control flow using helpers like
test_expect_code and git diff --exit-code, so each test assertion can
follow the usual form
command that should succeed &&
command that should succeed &&
command that should succeed &&
...
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some tests check their output with code like the following:
test "$(git ls-files -u B | wc -l)" -eq 3 || {
echo "BAD: should have left stages for B"
return 1
}
The verbose failure condition is used because test, unlike
diff, does not print any useful information about the
nature of the failure when it fails.
Introduce a test_line_count function to help. If used like
git ls-files -u B >output &&
test_line_count -eq 3 output
it will produce output like
test_line_count: line count for output !-eq 3
100644 b023018cabc396e7692c70bbf5784a93d3f738ab 2 hi.c
100644 45b983be36b73c0788dc9cbcb76cbb80fc7bb057 3 hi.c
on failure.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Same rules as before: this patch only adds " &&" to the end of
some lines in the test suite.
Intended to be applied on top of or squashed with the last
batch if they look okay.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Breaks in a test assertion's && chain can potentially hide
failures from earlier commands in the chain.
Commands intended to fail should be marked with !, test_must_fail, or
test_might_fail. The examples in this patch do not require that.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Support lines of the form "fixup! 7a235b" that specify an exact commit
in addition to the normal "squash! Old commit message" form.
Signed-off-by: Kevin Ballard <kevin@sb.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The current behvaior of --autosquash can duplicate fixup!/squash! lines
if they match multiple commits, and it can also apply them to commits
that come after them in the todo list. Even more oddly, a commit that
looks like "fixup! fixup!" will match itself and be duplicated in the
todo list.
Change the todo list rearranging to mark all commits as used as soon
as they are emitted, and to avoid emitting a fixup/squash commit if the
commit has already been marked as used.
Signed-off-by: Kevin Ballard <kevin@sb.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit c84de70 (excluded_1(): support exclude files in index -
2009-08-20) tries to work around the fact that there is no
directory/file information in index entries, therefore
EXC_FLAG_MUSTBEDIR match would fail.
Unfortunately the workaround is flawed. This fixes it.
Reported-by: Thomas Rinderknecht <thomasr@sailguy.org>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
1. When --in-reply-to gives $reply_to, the first one becomes a reply to
that message, with or without --chain-reply-to.
2. When --chain-reply-to is in effect, all the messages are strung
together to form a single chain. The first message may be in reply to
the $reply_to given by --in-reply-to command line option (see
previous), or the root of the discussion thread. The second one is a
response to the first one, and the third one is a response to the
second one, etc.
3. When --chain-reply-to is not in effect:
a. When --in-reply-to is used, too, the second and the subsequent ones
become replies to $reply_to. Together with the first rule, all
messages become replies to $reply_to given by --in-reply-to.
b. When --in-reply-to is not used, presumably the second and
subsequent ones become replies to the first one, which would be the
root.
The documentation is reasonably clear about the 1., 2. and 3a. above, I
think, even though I do not think 3b. is clearly specified.
The two tests added by this patch at least documents what happens between
these two options.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
t7500: test expected behavior of commit --squash
t3415: test interaction of commit --squash with rebase --autosquash
t3900: test commit --squash with i18n encodings
Signed-off-by: Pat Notz <patnotz@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
t7500: test expected behavior of commit --fixup
t3415: test interaction of commit --fixup with rebase --autosquash
t3900: test commit --fixup with i18n encodings
Signed-off-by: Pat Notz <patnotz@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Recursive invocations of submodule update/status preserve all arguments,
so executing
git submodule update --recursive -- foo
attempts to recursively update a submodule named "foo".
Naturally, this fails as one cannot have an infinitely-deep stack of
submodules each containing a submodule named "foo". The desired behavior
is instead to update foo and then recursively update all submodules
inside of foo.
This commit accomplishes that by only saving the flags for use in the
recursive invocation.
Signed-off-by: Kevin Ballard <kevin@sb.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Shell variables only hold strings, not lists of parameters,
so $orig_args after
orig_args="$@"
fails to remember where each parameter starts and ends, if
some include whitespace. So
git submodule update \
--reference='/var/lib/common objects.git' \
--recursive --init
becomes
git submodule update --reference=/var/lib/common \
objects.git --recursive --init
in the inner repositories. Use "git rev-parse --sq-quote" to
save parameters in quoted form ready for evaluation by the
shell, avoiding this problem.
Helped-By: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Kevin Ballard <kevin@sb.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
(Just like we did for documentation already)
In the process, we change "non-remote branch" to "branch outside the
refs/remotes/ hierarchy" to avoid the ugly "non-remote-tracking branch".
The new formulation actually corresponds to how the code detects this
case (i.e. prefixcmp(refname, "refs/remotes")).
Also, we use 'remote-tracking branch' in generated merge messages (by
merge an fmt-merge-msg).
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To complement the straightforward perl application in previous patch,
this adds a few manual changes.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"remote-tracking" branch makes it explicit that the branch is "tracking a
remote", as opposed to "remote, and tracking something".
See discussion in e.g.
http://mid.gmane.org/8835ADF9-45E5-4A26-9F7F-A72ECC065BB2@gmail.com
for more details.
This patch is a straightforward application of
perl -pi -e 's/remote tracking branch/remote-tracking branch/'
except in the RelNotes directory.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
