In a preceding commit we have extracted generic checks for both direct
and symbolic refs that apply for all backends. Wire up those checks for
the "reftable" backend.
Note that this is done by iterating through all refs manually with the
low-level reftable ref iterator. We explicitly don't want to use the
higher-level iterator that is exposed to users of the reftable backend
as that iterator may swallow for example broken refs.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The ref consistency checks are driven via `cmd_refs_verify()`. That
function loops through all worktrees (including the main worktree) and
then checks the ref store for each of them individually. It follows that
the backend is expected to only verify refs that belong to the specified
worktree.
While the "files" backend handles this correctly, the "reftable" backend
doesn't. In fact, it completely ignores the passed worktree and instead
verifies refs of _all_ worktrees. The consequence is that we'll end up
every ref store N times, where N is the number of worktrees.
Or rather, that would be the case if we actually iterated through the
worktree reftable stacks correctly. But we use `strmap_for_each_entry()`
to iterate through the stacks, but the map is in fact not even properly
populated. So instead of checking stacks N^2 times, we actually only end
up checking the reftable stack of the main worktree.
Fix this bug by only verifying the stack of the passed-in worktree and
constructing the backends via `backend_for_worktree()`.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Pull out the logic to retrieve a backend for a given worktree. This
function will be used in a subsequent commit.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Adapt the includes to be sorted and to use include paths that are
relative to the "refs/" directory.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In a subsequent commit we'll introduce new generic checks for direct
refs. These checks will be independent of the actual backend.
Introduce a new function `refs_fsck_ref()` that will be used for this
purpose. At the current point in time it's still empty, but it will get
populated in a subsequent commit.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The consistency checks for the "files" backend contain a couple of
verifications for symrefs that verify generic properties of the target
reference. These properties need to hold for every backend, no matter
whether it's using the "files" or "reftable" backend.
Reimplementing these checks for every single backend doesn't really make
sense. Extract it into a generic `refs_fsck_symref()` function that can
be used my other backends, as well. The "reftable" backend will be wired
up in a subsequent commit.
While at it, improve the consistency checks so that we don't complain
about refs pointing to a non-ref target in case the target refname
format does not verify. Otherwise it's very likely that we'll generate
both error messages, which feels somewhat redundant in this case.
Note that the function has a couple of `UNUSED` parameters. These will
become referenced in a subsequent commit.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
While the "files" backend already knows to perform consistency checks
for the "refs/" hierarchy, it doesn't verify any of its root refs. Plug
this omission.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The error handling when verifying symbolic refs is a bit on the wild
side:
- `fsck_report_ref()` can be told to ignore specific errors. If an
error has been ignored and a previous check raised an unignored
error, then assigning `ret = fsck_report_ref()` will cause us to
swallow the previous error.
- When the target reference is not valid we bail out early without
checking for other errors.
Fix both of these issues by consistently or'ing the return value and not
bailing out early.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When checking the consistency of references we create a directory
iterator and then verify each single reference in a loop. The logic to
perform the actual checks is embedded into that loop, which makes it
hard to reuse. But In a subsequent commit we're about to introduce a
second path that wants to verify references.
Prepare for this by extracting the logic to check a single reference
into a standalone function.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The function `files_fsck_refs()` only has a single callsite and forwards
all of its arguments as-is, so it's basically a useless indirection.
Inline the function call.
While at it, also remove the bitwise or that we have for return values.
We don't really want to or them at all, but rather just want to return
an error in case either of the functions has failed.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The parameter `refs_check_dir` determines which directory we want to
check references for. But as we always want to check the complete
refs hierarchy, this parameter is always set to "refs".
Drop the parameter and hardcode it.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When performing consistency checks we pass the functions that perform
the verification down the calling stack. This is somewhat unnecessary
though, as the set of functions doesn't ever change.
Simplify the code by moving the array into global scope and remove the
parameter.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When iterating through root refs we first need to determine the
directory in which the refs live. This is done by retrieving the root of
the loose refs via `refs->loose->root->name`, and putting it through
`files_ref_path()` to derive the final path.
This is somewhat redundant though: the root name of the loose files
cache is always going to be the empty string. As such, we always end up
passing that empty string to `files_ref_path()` as the ref hierarchy we
want to start. And this actually makes sense: `files_ref_path()` already
computes the location of the root directory, so of course we need to
pass the empty string for the ref hierarchy itself. So going via the
loose ref cache to figure out that the root of a ref hierarchy is empty
is only causing confusion.
But next to the added confusion, it can also lead to a segfault. The
loose ref cache is populated lazily, so it may not always be set. It
seems to be sheer luck that this is a condition we do not currently hit.
The right thing to do would be to call `get_loose_ref_cache()`, which
knows to populate the cache if required.
Simplify the code and fix the potential segfault by simply removing the
indirection via the loose ref cache completely.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Brown-paper-bag fix to a recently graduated
'kn/maintenance-is-needed' topic.
* gf/maintenance-is-needed-fix:
refs: dereference the value of the required pointer
Currently, this always prints yes because required is non-null.
This is the wrong behavior. The boolean must be
dereferenced.
Signed-off-by: Greg Funni <gfunni234@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git maintenance" command learned "is-needed" subcommand to tell if
it is necessary to perform various maintenance tasks.
* kn/maintenance-is-needed:
maintenance: add 'is-needed' subcommand
maintenance: add checking logic in `pack_refs_condition()`
refs: add a `optimize_required` field to `struct ref_storage_be`
reftable/stack: add function to check if optimization is required
reftable/stack: return stack segments directly
Code clean-up.
* kn/refs-optim-cleanup:
t/pack-refs-tests: move the 'test_done' to callees
refs: rename 'pack_refs_opts' to 'refs_optimize_opts'
refs: move to using the '.optimize' functions
Some ref backend storage can hold not just the object name of an
annotated tag, but the object name of the object the tag points at.
The code to handle this information has been streamlined.
* ps/ref-peeled-tags:
t7004: do not chdir around in the main process
ref-filter: fix stale parsed objects
ref-filter: parse objects on demand
ref-filter: detect broken tags when dereferencing them
refs: don't store peeled object IDs for invalid tags
object: add flag to `peel_object()` to verify object type
refs: drop infrastructure to peel via iterators
refs: drop `current_ref_iter` hack
builtin/show-ref: convert to use `reference_get_peeled_oid()`
ref-filter: propagate peeled object ID
upload-pack: convert to use `reference_get_peeled_oid()`
refs: expose peeled object ID via the iterator
refs: refactor reference status flags
refs: fully reset `struct ref_iterator::ref` on iteration
refs: introduce `.ref` field for the base iterator
refs: introduce wrapper struct for `each_ref_fn`
To allow users of the refs namespace to check if the reference backend
requires optimization, add a new field `optimize_required` field to
`struct ref_storage_be`. This field is of type `optimize_required_fn`
which is also introduced in this commit.
Modify the debug, files, packed and reftable backend to implement this
field. A following commit will expose this via 'git pack-refs' and 'git
refs optimize'.
Signed-off-by: Karthik Nayak <karthik.188@gmail.com>
Acked-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Our Bencher dashboards [1] have recently alerted us about a bunch of
performance regressions when writing references, specifically with the
reftable backend. There is a 3x regression when writing many refs with
preexisting refs in the reftable format, and a 10x regression when
migrating refs between backends in either of the formats.
Bisecting the issue lands us at 6ec4c0b45b (refs: don't store peeled
object IDs for invalid tags, 2025-10-23). The gist of the commit is that
we may end up storing peeled objects in both reftables and packed-refs
for corrupted tags, where the claimed tagged object type is different
than the actual tagged object type. This will then cause us to create
the `struct object *` with a wrong type, as well, and obviously nothing
good comes out of that.
The fix for this issue was to introduce a new flag to `peel_object()`
that causes us to verify the tagged object's type before writing it into
the refdb -- if the tag is corrupt, we skip writing the peeled value.
To verify whether the peeled value is correct we have to look up the
object type via the ODB and compare the actual type with the claimed
type, and that additional object lookup is costly.
This also explains why we see the regression only when writing refs with
the reftable backend, but we see the regression with both backends when
migrating refs:
- The reftable backend knows to store peeled values in the new table
immediately, so it has to try and peel each ref it's about to write
to the transaction. So the performance regression is visible for all
writes.
- The files backend only stores peeled values when writing the
packed-refs file, so it wouldn't hit the performance regression for
normal writes. But on ref migrations we know to write all new values
into the packed-refs file immediately, and that's why we see the
regression for both backends there.
Taking a step back though reveals an oddity in the new verification
logic: we not only verify the _tagged_ object's type, but we also verify
the type of the tag itself. But this isn't really needed, as we wouldn't
hit the bug in such a case anyway, as we only hit the issue with corrupt
tags claiming an invalid type for the tagged object.
The consequence of this is that we now started to look up the target
object of every single reference we're about to write, regardless of
whether it even is a tag or not. And that is of course quite costly.
Fix the issue by only verifying the type of the tagged objects. This
means that we of course still have a performance hit for actual tags.
But this only happens for writes anyway, and I'd claim it's preferable
to not store corrupted data in the refdb than to be fast here. Rename
the flag accordingly to clarify that we only verify the tagged object's
type.
This fix brings performance back to previous levels:
Benchmark 1: baseline
Time (mean ± σ): 46.0 ms ± 0.4 ms [User: 40.0 ms, System: 5.7 ms]
Range (min … max): 45.0 ms … 47.1 ms 54 runs
Benchmark 2: regression
Time (mean ± σ): 140.2 ms ± 1.3 ms [User: 77.5 ms, System: 60.5 ms]
Range (min … max): 138.0 ms … 142.7 ms 20 runs
Benchmark 3: fix
Time (mean ± σ): 46.2 ms ± 0.4 ms [User: 40.2 ms, System: 5.7 ms]
Range (min … max): 45.0 ms … 47.3 ms 55 runs
Summary
update-ref: baseline
1.00 ± 0.01 times faster than fix
3.05 ± 0.04 times faster than regression
[1]: https://bencher.dev/perf/git/plots
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* ps/ref-peeled-tags:
t7004: do not chdir around in the main process
ref-filter: fix stale parsed objects
ref-filter: parse objects on demand
ref-filter: detect broken tags when dereferencing them
refs: don't store peeled object IDs for invalid tags
object: add flag to `peel_object()` to verify object type
refs: drop infrastructure to peel via iterators
refs: drop `current_ref_iter` hack
builtin/show-ref: convert to use `reference_get_peeled_oid()`
ref-filter: propagate peeled object ID
upload-pack: convert to use `reference_get_peeled_oid()`
refs: expose peeled object ID via the iterator
refs: refactor reference status flags
refs: fully reset `struct ref_iterator::ref` on iteration
refs: introduce `.ref` field for the base iterator
refs: introduce wrapper struct for `each_ref_fn`
The "debug" ref-backend was missing a method implementation, which
has been corrected.
* xr/ref-debug-remove-on-disk:
refs: add missing remove_on_disk implementation for debug backend
* kn/refs-optim-cleanup:
t/pack-refs-tests: move the 'test_done' to callees
refs: rename 'pack_refs_opts' to 'refs_optimize_opts'
refs: move to using the '.optimize' functions
* ps/ref-peeled-tags: (23 commits)
t7004: do not chdir around in the main process
ref-filter: fix stale parsed objects
ref-filter: parse objects on demand
ref-filter: detect broken tags when dereferencing them
refs: don't store peeled object IDs for invalid tags
object: add flag to `peel_object()` to verify object type
refs: drop infrastructure to peel via iterators
refs: drop `current_ref_iter` hack
builtin/show-ref: convert to use `reference_get_peeled_oid()`
ref-filter: propagate peeled object ID
upload-pack: convert to use `reference_get_peeled_oid()`
refs: expose peeled object ID via the iterator
refs: refactor reference status flags
refs: fully reset `struct ref_iterator::ref` on iteration
refs: introduce `.ref` field for the base iterator
refs: introduce wrapper struct for `each_ref_fn`
builtin/repo: add progress meter for structure stats
builtin/repo: add keyvalue and nul format for structure stats
builtin/repo: add object counts in structure output
builtin/repo: introduce structure subcommand
...
The previous commit removed all references to 'pack_refs()' within
the refs subsystem. Continue this cleanup by also renaming
'pack_refs_opts' to 'refs_optimize_opts' and the respective flags
accordingly. Keeping the naming consistent will make the code easier to
maintain.
Signed-off-by: Karthik Nayak <karthik.188@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The `struct ref_store` variable exposes two ways to optimize a reftable
backend:
1. pack_refs
2. optimize
The former was specific to the 'files' + 'packed' refs backend. The
latter is more generic and covers all backends. While the naming is
different, both of these functions perform the same functionality.
Consolidate this code to only maintain the 'optimize' functions. Do this
by modifying the backends so that they exclusively implement the
`optimize` callback, only. All users of the refs subsystem already use
the 'optimize' function so there is no changes needed on the callee
side. Finally, cleanup all references to the 'pack_refs' field of the
structure and code around it.
Signed-off-by: Karthik Nayak <karthik.188@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Both the "files" and "reftable" backend store peeled object IDs for
references that point to tags:
- The "files" backend stores the value when packing refs, where each
peeled object ID is prefixed with "^".
- The "reftable" backend stores the value whenever writing a new
reference that points to a tag via a special ref record type.
Both of these backends use `peel_object()` to find the peeled object ID.
But as explained in the preceding commit, that function does not detect
the case where the tag's tagged object and its claimed type mismatch.
The consequence of storing these bogus peeled object IDs is that we're
less likely to detect such corruption in other parts of Git.
git-for-each-ref(1) for example does not notice anymore that the tag is
broken when using "--format=%(*objectname)" to dereference tags.
One could claim that this is good, because it still allows us to mostly
use the tag as intended. But the biggest problem here is that we now
have different behaviour for such a broken tag depending on whether or
not we have its peeled value in the refdb.
Fix the issue by verifying the object type when peeling the object. If
that verification fails we simply skip storing the peeled value in
either of the reference formats.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When peeling a tag to a non-tag object we repeatedly call
`parse_object()` on the tagged object until we find the first object
that isn't a tag. While this feels sensible at first, there is a big
catch here: `parse_object()` doesn't actually verify the type of the
tagged object.
The relevant code path here eventually ends up in `parse_tag_buffer()`.
Here, we parse the various fields of the tag, including the "type". Once
we've figured out the type and the tagged object ID, we call one of the
`lookup_${type}()` functions for whatever type we have found. There is
two possible outcomes in the successful case:
1. The object is already part of our cached objects. In that case we
double-check whether the type we're trying to look up matches the
type that was cached.
2. The object is _not_ part of our cached objects. In that case, we
simply create a new object with the expected type, but we don't
parse that object.
In the first case we might notice type mismatches, but only in the case
where our cache has the object with the correct type. In the second
case, we'll blindly assume that the type is correct and then go with it.
We'll only notice that the type might be wrong when we try to parse the
object at a later point.
Now arguably, we could change `parse_tag_buffer()` to verify the tagged
object's type for us. But that would have the effect that such a tag
cannot be parsed at all anymore, and we have a small bunch of tests for
exactly this case that assert we still can open such tags. So this
change does not feel like something we can retroactively tighten, even
though one shouldn't ever hit such corrupted tags.
Instead, add a new `flags` field to `peel_object()` that allows the
caller to opt in to strict object verification. This will be wired up at
a subset of callsites over the next few commits.
Note that this change also inlines `deref_tag_noverify()`. There's only
been two callsites of that function, the one we're changing and one in
our test helpers. The latter callsite can trivially use `deref_tag()`
instead, so by inlining the function we avoid having to pass down the
flag.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that the peeled object ID gets propagated via the `struct reference`
there is no need anymore to call into the reference iterator itself to
dereference an object. Remove this infrastructure.
Most of the changes are straight-forward deletions of code. There is one
exception though in `refs/packed-backend.c::write_with_updates()`. Here
we stop peeling the iterator and instead just pass the peeled object ID
of that iterator directly.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In preceding commits we have refactored all callers of
`peel_iterated_oid()` to instead use `reference_get_peeled_oid()`. This
allows us to thus get rid of the former function.
Getting rid of that function is nice, but even nicer is that this also
allows us to get rid of the `current_ref_iter` hack. This global
variable tracked the currently-active ref iterator so that we can use it
to peel an object ID. Now that the peeled object ID is propagated via
`struct reference` though we don't have to depend on this hack anymore,
which makes for a more robust and easier-to-understand infrastructure.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Both the "files" and "reftable" backend are able to store peeled values
for tags in the respective formats. This allows for a more efficient
lookup of the target object of such a tag without having to manually
peel via the object database.
The infrastructure to access these peeled object IDs is somewhat funky
though. When iterating through objects, we store a pointer reference to
the current iterator in a global variable. The callbacks invoked by that
iterator are then expected to call `peel_iterated_oid()`, which checks
whether the globally-stored iterator's current reference refers to the
one handed into that function. If so, we ask the iterator to peel the
object, otherwise we manually peel the object via the object database.
Depending on global state like this is somewhat weird and also quite
fragile.
Introduce a new `struct reference::peeled_oid` field that can be
populated by the reference backends. This field can be accessed via a
new function `reference_get_peeled_oid()` that either uses that value,
if set, or alternatively peels via the ODB. With this change we don't
have to rely on global state anymore, but make the peeled object ID
available to the callback functions directly.
Adjust trivial callers that already have a `struct reference` available.
Remaining callers will be adjusted in subsequent commits.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With the introduction of the `struct ref_iterator::ref` field it now is
a whole lot easier to introduce new fields that become accessible to the
caller without having to adapt every single callsite. But there's a
downside: when a new field is introduced we always have to adapt all
backends to set that field.
This isn't something we can avoid in the general case: when the new
field is expected to be populated by all backends we of course cannot
avoid doing so. But new fields may be entirely optional, in which case
we'd still have such churn. And furthermore, it is very easy right now
to leak state from a previous iteration into the next iteration.
Address this issue by ensuring that the reference backends all fully
reset the field on every single iteration. This ensures that no state
from previous iterations can leak into the next one. And it ensures that
any newly introduced fields will be zeroed out by default.
Note that we don't have to explicitly adapt the "files" backend, as it
uses the `cache_ref_iterator` internally. Furthermore, other "wrapping"
iterators like for example the `prefix_ref_iterator` copy around the
whole reference, so these don't need to be adapted either.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The base iterator has a couple of fields that tracks the name, target,
object ID and flags for the current reference. Due to this design we
have to create a new `struct reference` whenever we want to hand over
that reference to the callback function, which is tedious and not very
efficient.
Convert the structure to instead contain a `struct reference` as member.
This member is expected to be populated by the implementations of the
iterator and is handed over to the callback directly.
While at it, simplify `should_pack_ref()` to take a `struct reference`
directly instead of passing its respective fields.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The `each_ref_fn` callback function type is used across our code base
for several different functions that iterate through reference. There's
a bunch of callbacks implementing this type, which makes any changes to
the callback signature extremely noisy. An example of the required churn
is e8207717f1 (refs: add referent to each_ref_fn, 2024-08-09): adding a
single argument required us to change 48 files.
It was already proposed back then [1] that we might want to introduce a
wrapper structure to alleviate the pain going forward. While this of
course requires the same kind of global refactoring as just introducing
a new parameter, it at least allows us to more change the callback type
afterwards by just extending the wrapper structure.
One counterargument to this refactoring is that it makes the structure
more opaque. While it is obvious which callsites need to be fixed up
when we change the function type, it's not obvious anymore once we use
a structure. That being said, we only have a handful of sites that
actually need to populate this wrapper structure: our ref backends,
"refs/iterator.c" as well as very few sites that invoke the iterator
callback functions directly.
Introduce this wrapper structure so that we can adapt the iterator
interfaces more readily.
[1]: <ZmarVcF5JjsZx0dl@tanuki>
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"Symlink symref" has been added to the list of things that will
disappear at Git 3.0 boundary.
* ps/symlink-symref-deprecation:
refs/files: deprecate writing symrefs as symbolic links
The debug ref backend (refs_be_debug) was missing the remove_on_disk
function pointer, which caused a segmentation fault when running
'GIT_TRACE_REFS=1 git refs migrate --ref-format=reftable' commands.
Signed-off-by: Xinyu Ruan <r200981113@gmail.com>
Acked-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Deal more gracefully with directory / file conflicts when the files
backend is used for ref storage, by failing only the ones that are
involved in the conflict while allowing others.
* kn/refs-files-case-insensitive:
refs/files: handle D/F conflicts during locking
refs/files: handle F/D conflicts in case-insensitive FS
refs/files: use correct error type when lock exists
refs/files: catch conflicts on case-insensitive file-systems
"git refs migrate" to migrate the reflog entries from a refs
backend to another had a handful of bugs squashed.
* ps/reflog-migrate-fixes:
refs: fix invalid old object IDs when migrating reflogs
refs: stop unsetting REF_HAVE_OLD for log-only updates
refs/files: detect race when generating reflog entry for HEAD
refs: fix identity for migrated reflogs
ident: fix type of string length parameter
builtin/reflog: implement subcommand to write new entries
refs: export `ref_transaction_update_reflog()`
builtin/reflog: improve grouping of subcommands
Documentation/git-reflog: convert to use synopsis type
The "files" backend has the ability to store symbolic refs as symbolic
links, which can be configured via "core.preferSymlinkRefs". This
feature stems back from the early days: the initial implementation of
symbolic refs used symlinks exclusively. The symref format was only
introduced in 9b143c6e15 (Teach update-ref about a symbolic ref stored
in a textfile., 2005-09-25) and made the default in 9f0bb90d16
(core.prefersymlinkrefs: use symlinks for .git/HEAD, 2006-05-02).
This is all about 20 years ago, and there are no known reasons nowadays
why one would want to use symlinks instead of symrefs. Mark the feature
for deprecation in Git 3.0.
Note that this only deprecates _writing_ symrefs as symbolic links.
Reading such symrefs is still supported for now.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The reftable backend learned to sanity check its on-disk data more
carefully.
* kn/reftable-consistency-checks:
refs/reftable: add fsck check for checking the table name
reftable: add code to facilitate consistency checks
fsck: order 'fsck_msg_type' alphabetically
Documentation/fsck-msgids: remove duplicate msg id
reftable: check for trailing newline in 'tables.list'
refs: move consistency check msg to generic layer
refs: remove unused headers
When `NO_SYMLINK_HEAD` is defined, `create_ref_symlink()` is hard-coded
as `(-1)`, and as a consequence the condition `!create_ref_symlink()`
always evaluates to false, rendering any code guarded by that condition
unreachable.
Therefore, clang is _technically_ correct when it complains about
unreachable code. It does completely miss the fact that this is okay
because on _other_ platforms, where `NO_SYMLINK_HEAD` is not defined,
the code isn't unreachable at all.
Let's use the same trick as in 82e79c63642c (git-compat-util: add
NOT_CONSTANT macro and use it in atfork_prepare(), 2025-03-17) to
appease clang while at the same time keeping the `-Wunreachable` flag
to potentially find _actually_ unreachable code.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Handling of an empty subdirectory of .git/refs/ in the ref-files
backend has been corrected.
* kn/ref-cache-seek-fix:
refs/ref-cache: fix SEGFAULT when seeking in empty directories
Add glue code in 'refs/reftable-backend.c' which calls the reftable
library to perform the fsck checks. Here we also map the reftable errors
to Git' fsck errors.
Introduce a check to validate table names for a given reftable stack.
Also add 'badReftableTableName' as a corresponding error within Git. The
reftable specification mentions:
It suggested to use
${min_update_index}-${max_update_index}-${random}.ref as a naming
convention.
So treat non-conformant file names as warnings.
While adding the fsck header to 'refs/reftable-backend.c', modify the
list to maintain lexicographical ordering.
Signed-off-by: Karthik Nayak <karthik.188@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The files-backend prints a message before the consistency checks run.
Move this to the generic layer so both the files and reftable backend
can benefit from this message.
Signed-off-by: Karthik Nayak <karthik.188@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the 'refs/' namespace, some of the included header files are not
needed, let's remove them.
Signed-off-by: Karthik Nayak <karthik.188@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
