"git fetch --mirror" and fetch that uses other forms of refspec with
wildcard used to attempt to update a symbolic ref that match the
wildcard on the receiving end, which made little sense (the real ref
that is pointed at by the symbolic ref would be updated anyway).
Symbolic refs no longer are affected by such a fetch.
* jc/fetch-ignore-symref:
fetch: ignore wildcarded refspecs that update local symbolic refs
get_shallow_commits() is used to determine the cut points at a given
depth (i.e. the number of commits in a chain that the user likes to
get). However we count current depth up to the commit "commit" but we
do the cutting at its parents (i.e. current depth + 1). This makes
upload-pack always return one commit more than requested. This patch
fixes it.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The user can do --depth=2147483647 (*) for restoring complete repo
now. But it's hard to remember. Any other numbers larger than the
longest commit chain in the repository would also do, but some
guessing may be involved. Make easy-to-remember --unshallow an alias
for --depth=2147483647.
Make upload-pack recognize this special number as infinite depth. The
effect is essentially the same as before, except that upload-pack is
more efficient because it does not have to traverse to the bottom
anymore.
The chance of a user actually wanting exactly 2147483647 commits
depth, not infinite, on a repository with a history that long, is
probably too small to consider. The client can learn to add or
subtract one commit to avoid the special treatment when that actually
happens.
(*) This is the largest positive number a 32-bit signed integer can
contain. JGit and older C Git store depth as "int" so both are OK
with this number. Dulwich does not support shallow clone.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Brace expansion is a shell feature that's not required by POSIX and not
supported by dash nor NetBSD's sh. Explicitly list all combinations
instead. Also avoid calling touch by creating the test files with a
redirection instead, as suggested by Junio.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* nd/invalidate-i-t-a-cache-tree:
cache-tree: invalidate i-t-a paths after generating trees
cache-tree: fix writing cache-tree when CE_REMOVE is present
cache-tree: replace "for" loops in update_one with "while" loops
cache-tree: remove dead i-t-a code in verify_cache()
When "git clone --separate-git-dir" is interrupted, we failed to
remove the real location we created the repository.
* jl/interrupt-clone-remove-separate-git-dir:
clone: support atomic operation with --separate-git-dir
Allows pathname patterns in .gitignore and .gitattributes files
with double-asterisks "foo/**/bar" to match any number of directory
hierarchies.
* nd/wildmatch:
wildmatch: replace variable 'special' with better named ones
compat/fnmatch: respect NO_FNMATCH* even on glibc
wildmatch: fix "**" special case
t3070: Disable some failing fnmatch tests
test-wildmatch: avoid Windows path mangling
Support "**" wildcard in .gitignore and .gitattributes
wildmatch: make /**/ match zero or more directories
wildmatch: adjust "**" behavior
wildmatch: fix case-insensitive matching
wildmatch: remove static variable force_lower_case
wildmatch: make wildmatch's return value compatible with fnmatch
t3070: disable unreliable fnmatch tests
Integrate wildmatch to git
wildmatch: follow Git's coding convention
wildmatch: remove unnecessary functions
Import wildmatch from rsync
ctype: support iscntrl, ispunct, isxdigit and isprint
ctype: make sane_ctype[] const array
Conflicts:
Makefile
Allow "git cherry-pick $commit" even when you do not have any
history behind HEAD yet.
* mz/pick-unborn:
learn to pick/revert into unborn branch
tests: move test_cmp_rev to test-lib-functions
Teach "log.mailmap" configuration variable to turn "--use-mailmap"
option on to "git log", "git show" and "git whatchanged".
The "--no-use-mailmap" option from the command line can countermand
the setting.
Signed-off-by: Antoine Pelisse <apelisse@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently you can use mailmap to display log authors and committers
but you can't use the mailmap to find commits with mapped values.
This commit allows you to run:
git log --use-mailmap --author mapped_name_or_email
git log --use-mailmap --committer mapped_name_or_email
Of course it only works if the --use-mailmap option is used.
The new name and email are copied only when necessary.
Signed-off-by: Antoine Pelisse <apelisse@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The new option '--use-mailmap' can be used to make sure that mailmap
file is used to convert name when running log commands.
The test is simple and checks that the Author line
is correctly replaced when running log.
Signed-off-by: Antoine Pelisse <apelisse@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The default of the "cleanup" option in "git commit"
is not configurable. Users who don't want to use the
default have to pass this option on every commit since
there's no way to configure it. This commit introduces
a new config option "commit.cleanup" which can be used
to change the default of the "cleanup" option in
"git commit".
Signed-off-by: Ralf Thielow <ralf.thielow@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach various forms of "format-patch" command line to identify what
branch the patches are taken from, so that the branch description
is picked up in more cases.
* nd/maint-branch-desc-doc:
format-patch: pick up branch description when no ref is specified
format-patch: pick up correct branch name from symbolic ref
t4014: a few more tests on cover letter using branch description
branch: delete branch description if it's empty
config.txt: a few lines about branch.<name>.description
We have two simple and quick tests to catch common mistakes when
writing test scripts, but we did not run them by default when
running tests.
* jk/enable-test-lint-by-default:
tests: turn on test-lint by default
"git merge" started calling prepare-commit-msg hook like "git
commit" does some time ago, but forgot to pay attention to the exit
status of the hook. t7505 may want a general clean-up but that is
a different topic.
* ap/merge-stop-at-prepare-commit-msg-failure:
merge: Honor prepare-commit-msg return code
A few short-and-bland aliases used in the tests were interfering
with git-custom command in user's $PATH.
* as/test-name-alias-uniquely:
Use longer alias names in subdirectory tests
The test fails for me on NetBSD 6.0.1 and reports:
ok 1 - ref name '' is invalid
ok 2 - ref name '/' is invalid
ok 3 - ref name '/' is invalid with options --allow-onelevel
ok 4 - ref name '/' is invalid with options --normalize
error: bug in the test script: not 2 or 3 parameters to test-expect-success
The alleged bug is in this line:
invalid_ref NOT_MINGW '/' '--allow-onelevel --normalize'
invalid_ref() constructs a test case description using its last argument,
but the shell seems to split it up into two pieces if it contains a
space. Minimal test case:
# on NetBSD with /bin/sh
$ a() { echo $#-$1-$2; }
$ t="x"; a "${t:+$t}"
1-x-
$ t="x y"; a "${t:+$t}"
2-x-y
$ t="x y"; a "${t:+x y}"
1-x y-
# and with bash
$ t="x y"; a "${t:+$t}"
1-x y-
$ t="x y"; a "${t:+x y}"
1-x y-
This may be a bug in the shell, but here's a simple workaround: Construct
the description string first and store it in a variable, and then use
that to call test_expect_success().
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Only add a symlink to the repository if both the filesystem and
unzip support symlinks. To check the latter, add a ZIP file
containing a symlink, created like this with InfoZIP zip 3.0:
$ echo sample text >textfile
$ ln -s textfile symlink
$ zip -y infozip-symlinks.zip textfile symlink
If we can extract it successfully, we add a symlink to the test
repository for git archive --format=zip, or otherwise skip that
step. Users can see the skipped test and perhaps run it again
with a different unzip version.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This change makes the code smaller and we can put it at the top of
the script, its rightful place as setup code.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
InfoZIP's unzip takes default parameters from the environment variable
UNZIP. Unset it in the test library and use GIT_UNZIP for specifying
alternate versions of the unzip command instead.
t0024 wasn't even using variable for the actual extraction. t5000
was, but when setting it to InfoZIP's unzip it would try to extract
from itself (because it treats the contents of $UNZIP as parameters),
which failed of course.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Windows disallows file names that contain a star. Arrange the test setup
to insert the file name "f*" in the repository without the corresponding
file in the worktree.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a sub-command dies due to a signal, we encode the
signal number into the numeric exit status as "signal -
128". This is easy to identify (versus a regular positive
error code), and when cast to an unsigned integer (e.g., by
feeding it to exit), matches what a POSIX shell would return
when reporting a signal death in $? or through its own exit
code.
So we have a negative value inside the code, but once it
passes across an exit() barrier, it looks positive (and any
code we receive from a sub-shell will have the positive
form). E.g., death by SIGPIPE (signal 13) will look like
-115 to us in inside git, but will end up as 141 when we
call exit() with it. And a program killed by SIGPIPE but run
via the shell will come to us with an exit code of 141.
Unfortunately, this means that when the "use_shell" option
is set, we need to be on the lookout for _both_ forms. We
might or might not have actually invoked the shell (because
we optimize out some useless shell calls). If we didn't invoke
the shell, we will will see the sub-process's signal death
directly, and run-command converts it into a negative value.
But if we did invoke the shell, we will see the shell's
128+signal exit status. To be thorough, we would need to
check both, or cast the value to an unsigned char (after
checking that it is not -1, which is a magic error value).
Fortunately, most callsites do not care at all whether the
exit was from a code or from a signal; they merely check for
a non-zero status, and sometimes propagate the error via
exit(). But for the callers that do care, we can make life
slightly easier by just using the consistent positive form.
This actually fixes two minor bugs:
1. In launch_editor, we check whether the editor died from
SIGINT or SIGQUIT. But we checked only the negative
form, meaning that we would fail to notice a signal
death exit code which was propagated through the shell.
2. In handle_alias, we assume that a negative return value
from run_command means that errno tells us something
interesting (like a fork failure, or ENOENT).
Otherwise, we simply propagate the exit code. Negative
signal death codes confuse us, and we print a useless
"unable to run alias 'foo': Success" message. By
encoding signal deaths using the positive form, the
existing code just propagates it as it would a normal
non-zero exit code.
The downside is that callers of run_command can no longer
differentiate between a signal received directly by the
sub-process, and one propagated. However, no caller
currently cares, and since we already optimize out some
calls to the shell under the hood, that distinction is not
something that should be relied upon by callers.
Fix the same logic in t/test-terminal.perl for consistency [jc:
raised by Jonathan in the discussion].
Signed-off-by: Jeff King <peff@peff.net>
Acked-by: Johannes Sixt <j6t@kdbg.org>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The beginning of 'integrate with the tip of the remote branch, not
the commit recorded in the superproject gitlink' support.
* wk/submodule-update-remote:
submodule add: If --branch is given, record it in .gitmodules
submodule update: add --remote for submodule's upstream changes
submodule: add get_submodule_config helper funtion
Allow scripts to feed literal paths to commands that take
pathspecs, by disabling wildcard globbing.
* jk/pathspec-literal:
add global --literal-pathspecs option
Conflicts:
dir.c
Introduce "log --format=%C(auto,blue)Foo%C(auto,reset)" that does
not color its output when writing to a non-terminal.
* jc/format-color-auto:
log --format: teach %C(auto,black) to respect color config
t6006: clean up whitespace
The attribute mechanism didn't allow limiting attributes to be
applied to only a single directory itself with "path/" like the
exclude mechanism does.
* ja/directory-attrs:
Add directory pattern matching to attributes
Allow us to read, and default to read, mailmap files from the tip
of the history in bare repositories. This will help running tools
like shortlog in server settings.
* jk/mailmap-from-blob:
mailmap: default mailmap.blob in bare repositories
mailmap: fix some documentation loose-ends for mailmap.blob
mailmap: clean up read_mailmap error handling
mailmap: support reading mailmap from blobs
mailmap: refactor mailmap parsing for non-file sources
Avoid false error from an attempt to update local symbolic ref via
fetch.
* jc/fetch-ignore-symref:
fetch: ignore wildcarded refspecs that update local symbolic refs
Require "-f" for push to update a tag, even if it is a fast-forward.
* cr/push-force-tag-update:
push: allow already-exists advice to be disabled
push: rename config variable for more general use
push: cleanup push rules comment
push: clarify rejection of update to non-commit-ish
push: require force for annotated tags
push: require force for refs under refs/tags/
push: flag updates that require force
push: keep track of "update" state separately
push: add advice for rejected tag reference
push: return reject reasons as a bitset
Various updates to fast-export used in the context of the remote
helper interface.
* fc/fast-export-fixes:
fast-export: make sure updated refs get updated
fast-export: don't handle uninteresting refs
fast-export: fix comparison in tests
fast-export: trivial cleanup
remote-testgit: implement the "done" feature manually
remote-testgit: report success after an import
remote-testgit: exercise more features
remote-testgit: cleanup tests
remote-testgit: remove irrelevant test
remote-testgit: remove non-local functionality
Add new simplified git-remote-testgit
Rename git-remote-testgit to git-remote-testpy
remote-helpers: fix failure message
remote-testgit: fix direction of marks
fast-export: avoid importing blob marks
Since b57fb80a7d (init, clone: support --separate-git-dir for .git file)
git clone supports the --separate-git-dir option to create the git dir
outside the work tree. But when that option is used, the git dir won't be
deleted in case the clone fails like it would be without this option. This
makes clone lose its atomicity as in case of a failure a partly set up git
dir is left behind. A real world example where this leads to problems is
when "git submodule update" fails to clone a submodule and later calls to
"git submodule update" stumble over the partially set up git dir and try
to revive the submodule from there, which then fails with a not very user
friendly error message.
Fix that by updating the junk_git_dir variable (used to remember if and
what git dir should be removed in case of failure) to the new value given
with the --seperate-git-dir option. Also add a test for this to t5600 (and
while at it fix the former last test to not cd into a directory to test
for its existence but use "test -d" instead).
Reported-by: Manlio Perillo <manlio.perillo@gmail.com>
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
