The typical usage pattern would be to run a test (or simply a compilation
command) at given points in history.
The shell command is ran (from the worktree root), and the rebase is
stopped when the command fails, to give the user an opportunity to fix
the problem before continuing with "git rebase --continue".
This needs a little rework of skip_unnecessary_picks, which wasn't robust
enough to deal with lines like
exec >"file name with many spaces"
in the todolist. The new version extracts command, sha1 and rest from
each line, but outputs the line itself verbatim to avoid changing the
whitespace layout.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are two ways a user might want to use "diff --relative":
1. For a file in a directory, like "subdir/file", the user
can use "--relative=subdir/" to strip the directory.
2. To strip part of a filename, like "foo-10", they can
use "--relative=foo-".
We currently handle both of those situations. However, if the user passes
"--relative=subdir" (without the trailing slash), we produce inconsistent
results. For the unified diff format, we collapse the double-slash of
"a//file" correctly into "a/file". But for other formats (raw, stat,
name-status), we end up with "/file".
We can do what the user means here and strip the extra "/" (and only a
slash). We are not hurting any existing users of (2) above with this
behavior change because the existing output for this case was nonsensical.
Patch by Jakub, tests and commit message by Jeff King.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git grep already runs a repository search unconditionally,
even when the --no-index option is supplied; running such a
search earlier is not very risky.
Just like with shortlog, without this change, the
“[pager] grep” configuration is not respected at all.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
shortlog already runs a repository search unconditionally;
running such a search earlier is not very risky.
Without this change, the “[pager] shortlog” configuration
is not respected at all: “git shortlog” unconditionally paginates.
The tests are a bit slow. Running the full battery like this
for all built-in commands would be counterproductive; the intent is
rather to test shortlog as a representative example command using
..._gently().
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
gitweb: clarify search results page when no matching commit found
Documentation: add a FILES section for show-ref
Makefile: add missing dependency on http.h
Makefile: add missing dependencies on url.h
Documentation/git-log: Clarify --full-diff
git-rebase: fix typo when parsing --force-rebase
imap-send: Fix sprintf usage
prune: allow --dry-run for -n and --verbose for -v
notes: allow --dry-run for -n and --verbose for -v
Document -B<n>[/<m>], -M<n> and -C<n> variants of -B, -M and -C
Documentation: cite git-am from git-apply
t7003: fix subdirectory-filter test
Allow "check-ref-format --branch" from subdirectory
check-ref-format: handle subcommands in separate functions
pretty-options.txt: match --format's documentation with implementation.
Ensure that strcmp() isn't called when head is null.
Previously we were getting segfaults when checkout -B was done from a
detached HEAD.
Signed-off-by: Tay Ray Chuan <rctay89@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Sparse checkout narrows worktree down based on the skip-worktree bit
before and after $GIT_DIR/info/sparse-checkout application. If it does
not have that bit before but does after, a narrow is detected and the
file will be removed from worktree.
New files added by merge, however, does not have skip-worktree bit. If
those files appear to be outside checkout area, the same rule applies:
the file gets removed from worktree even though they don't exist in
worktree.
Just pretend they have skip-worktree before in that case, so the rule
is ignored.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To avoid touching the worktree outside a sparse checkout,
when the update flag is enabled unpack_trees() clears the
CE_UPDATE and CE_REMOVE flags on entries that do not match the
sparse pattern before actually committing any updates to the
index file or worktree.
The effect on the index was unintentional; sparse checkout was
never meant to prevent index updates outside the area checked
out. And the result is very confusing: for example, after a
failed merge, currently "git reset --hard" does not reset the
state completely but an additional "git reset --mixed" will.
So stop clearing the CE_REMOVE flag. Instead, maintain a
CE_WT_REMOVE flag to separately track whether a particular
file removal should apply to the worktree in addition to the
index or not.
The CE_WT_REMOVE flag is used already to mark files that
should be removed because of a narrowing checkout area. That
usage will still apply; do not clear the CE_WT_REMOVE flag
in that case (detectable because the CE_REMOVE flag is not
set).
This bug masked some other bugs illustrated by the test
suite, which will be addressed by later patches.
Reported-by: Frédéric Brière <fbriere@fbriere.net>
Fixes: http://bugs.debian.org/583699
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The purpose of this clearing is, as explained in comment, because
verify_*() may set those bits before apply_sparse_checkout() is
called. By that time, it's not clear whether an entry will stay in
checkout area or out. After $GIT_DIR/info/sparse-checkout is applied,
we know what entries will be in finally. It's time to clean unwanted
bits.
That works perfectly when checkout area remains unchanged. When
checkout area changes, apply_sparse_checkout() may set CE_UPDATE
or CE_WT_REMOVE to widen/narrow checkout area. Doing the clearing
after apply_sparse_checkout() may clear those widening/narrowing
bits unexpectedly.
So, only do that on entries that are not affected by checkout area
changes (i.e. skip-worktree bit does not change after
apply_sparse_checkout).
This code does not actually fix anything though, just
future-proof. The removed code and the narrow/widen code inside
apply_sparse_checkout are currently independent (narrow code never
sets CE_REMOVE, widen code sets CE_UPDATE, but ce_skip_worktree()
would be false).
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The test would not fail if the filtering failed to do anything, since
in
test -z "$(git diff HEAD directorymoved:newsubdir)"'
'directorymoved:newsubdir' is not valid, so git-diff fails without
printing anything on stdout. But then the exit status of git-diff is
lost, whereas test -z "" succeeds.
Use 'git diff --exit-code' instead, which does the right thing and has
the added bonus of showing the differences if there are any.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The .gitmodules file is parsed for "submodule.<name>.ignore" entries
before looking for them in .git/config. Thus settings found in .git/config
will override those from .gitmodules, thereby allowing the local developer
to ignore settings given by the remote side while also letting upstream
set defaults for those users who don't have special needs.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The new "ignore" config option controls the default behavior for "git
status" and the diff family. It specifies under what circumstances they
consider submodules as modified and can be set separately for each
submodule.
The command line option "--ignore-submodules=" has been extended to accept
the new parameter "none" for both status and diff.
Users that chose submodules to get rid of long work tree scanning times
might want to set the "dirty" option for those submodules. This brings
back the pre 1.7.0 behavior, where submodule work trees were never
scanned for modifications. By using "--ignore-submodules=none" on the
command line the status and diff commands can be told to do a full scan.
This option can be set to the following values (which have the same name
and meaning as for the "--ignore-submodules" option of status and diff):
"all": All changes to the submodule will be ignored.
"dirty": Only differences of the commit recorded in the superproject and
the submodules HEAD will be considered modifications, all changes
to the work tree of the submodule will be ignored. When using this
value, the submodule will not be scanned for work tree changes at
all, leading to a performance benefit on large submodules.
"untracked": Only untracked files in the submodules work tree are ignored,
a changed HEAD and/or modified files in the submodule will mark it
as modified.
"none" (which is the default): Either untracked or modified files in a
submodules work tree or a difference between the subdmodules HEAD
and the commit recorded in the superproject will make it show up
as changed. This value is added as a new parameter for the
"--ignore-submodules" option of the diff family and "git status"
so the user can override the settings in the configuration.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
check-ref-format --branch requires access to the repository
to resolve refs like @{-1}.
Noticed by Nguyễn Thái Ngọc Duy.
Cc: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Guard all test code with test_expect_success to make the
script easier to follow. While at it, pick some other nits:
- use test_tick (more than we have to, to be realistic);
- 'single quotes' and \escaped HERE documents where possible
simplify review for escaping problems;
- omit whitespace after >redirection operators for
consistency with other tests;
- use "update-index --refresh" instead of testing that
"ls-files -u" output is empty, since the former produces
nicer output on failure;
- compare to expected nonempty "ls-files -u" output instead
of counting lines when it is expected to be nonempty.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
An unusual sort of person (not me) may even enjoy the conflicts
from line-ending changes. But more importantly, it is useful to
document that behavior so we can more easily notice if it changes
in an uncontrolled way while no one is watching.
Cc: Eyvind Bernhardsen <eyvind.bernhardsen@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
checkout -m and cherry-pick have not been wired up to respect
merge.renormalize, but a naïve user would not know that.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some tweaks to simplify adding and running tests.
- Use test_tick for predictable, sort of realistic commit dates;
- Use test_cmp as "test_cmp expected actual" --- some crazy
content that was not expected should cause the test to fail;
- Remove and re-add all files at the start of each test so the
worktree is easier to think about;
- Avoid using cat where not necessary for clarity.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the option parsing logic in revision.c to accept separate forms
like `-S foo' in addition to `-Sfoo'. The rest of git already accepted
this form, but revision.c still used its own option parsing.
Short options affected are -S<string>, -l<num> and -O<orderfile>, for
which an empty string wouldn't make sense, hence -<option> <arg> isn't
ambiguous.
This patch does not handle --stat-name-width and --stat-width, which are
special-cases where diff_long_opt do not apply. They are handled in a
separate patch to ease review.
Original patch by Matthieu Moy, plus refactoring by Jonathan Nieder.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
v1.6.1.3~4^2 (Fix gitdir detection when in subdir of gitdir,
2009-01-16) did not go far enough: when a git directory is
an ancestor of the original working directory, not only
should GIT_DIR be set to point to the .git directory, but
the original working directory should be restored before
carrying out the relevant command.
This way, the effect of running a git command from a subdir
of .git will be the same whether or not GIT_DIR is explicitly
set.
Noticed while investigating v1.6.0.3~1 (rehabilitate 'git
index-pack' inside the object store, 2008-10-20).
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git apply", like most plumbing, does not automatically refresh the
index file even if it is only stat-dirty. So unless the two "cp"
commands in reset_preimage() for a given file happen to have the same
time stamp, there will be a spurious
error: sub/dir/file: does not match index
Refresh the index to eliminate this timing dependency. Noticed by
running the test with --valgrind (which slows things down a lot).
Reported-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-rebase calls out to merge strategies, but did not support merge
strategy options so far. Add this, in the same style used in
git-merge.
Sadly we have to do the full quoting/eval dance here, since
merge-recursive supports the --subtree=<path> option which potentially
contains whitespace.
This patch does not cover git rebase -i, which does not call any merge
strategy directly except in --preserve-merges, and even then only for
merges.
[jc: with a trivial fix-up for 'expr']
Signed-off-by: Mike Lundy <mike@fluffypenguin.org>
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When printing an error message saying a ref was requested that we do not
have, only print that ref, rather than the ref and everything sent to us
on the same packet line (e.g. protocol support specifications).
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The dcommit command fails if an otherwise unmodified file has
been touched in the working directory:
Cannot dcommit with a dirty index. Commit your changes
first, or stash them with `git stash'.
This happens because "git diff-index" reports a difference
between the index and the filesystem:
:100644 100644 d00491...... 000000...... M file
The fix is to run "git update-index --refresh" before
"git diff-index" as is done in git-rebase and
git-rebase--interactive before "git diff-files".
This changes dcommit to display a list of modified files before
exiting.
Also add a similar test case for "git svn rebase".
[ew: rearranged commit message subject]
Signed-off-by: David D. Kilzer <ddkilzer@kilzer.net>
Acked-by: Eric Wong <normalperson@yhbt.net>
* maint:
test-lib: Remove 3 year old no-op --no-python option
test-lib: Ignore --quiet under a TAP harness
Documentation/rev-parse: quoting is required with --parseopt
Documentation: reporting bugs
Fix git rebase --continue to work with touched files
Document ls-files -t as semi-obsolete.
The --no-python option was added to test-lib.sh by Johannes Schindelin
in early 2006 in abb7c7b3. It was later turned into a no-op by Junio C
Hamano in 7cdbff14 the same year.
Over three years is long enough before removing this old wart which
was retained for backwards compatibility. Our tests have been using
NO_PYTHON and "test_have_prereq PYTHON" for a long time now.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Running the tests with --quiet under a TAP harness will always fail,
since a TAP harness always needs actual test output to go along with
the plan that's being emitted.
Change the test-lib.sh to ignore the --quiet option under
HARNESS_ACTIVE to work around this. Then users that have --quiet in
their GIT_TEST_OPTS can run tests under prove(1) without everything
breaking.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Tweak the rest of the script to more closely follow the test
style guide. Guarding setup commands with test_expect_success
makes it easy to see the scope in which some particular data is
used; removal of whitespace after >redirection operators is just
for consistency.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When performing a non-interactive rebase, sometimes
"git rebase --continue" will fail if an unmodified file is
touched in the working directory:
You must edit all merge conflicts and then
mark them as resolved using git add
This is caused by "git diff-files" reporting a difference
between the index and the filesystem:
:100644 100644 d00491...... 000000...... M file
The fix is to run "git update-index --refresh" before
"git diff-files" as is done in git-rebase--interactive.
Signed-off-by: David D. Kilzer <ddkilzer@kilzer.net>
Acked-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Given a file with:
(define archive-id "$Format:%ct|%h|a$")
and an export-subst attribute, the "%h" results in an full 40-digit
object name instead of the expected 7-digit one.
The export-subst feature requests unabbreviated object names because
that is the low-level default. The effect was not observable until
v1.7.1.1~17^2~3 (2010-05-03), which taught log --format=%h to respect
the --abbrev option.
Reported-by: Eli Barzilay <eli@barzilay.org>
Tested-by: Eli Barzilay <eli@barzilay.org>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Various merge-recursive cases were fixed in "merge-recursive: Fix D/F
conflicts" by Elijah Newren. Some tests were changed from
test_expect_failure to test_expect_success, but one fell through the
cracks.
Change that test to use test_expect_success.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If $HOME is unset (as in some automated build situations),
currently
git config --path path.home "~"
git config --path --get path.home
segfaults. Error out with
Failed to expand user dir in: '~/'
instead.
Reported-by: Julien Cristau <jcristau@debian.org>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We document how to run prove with the --state option in t/README. This
produces a .prove YAML file in the current directory. Change the t/
gitignore to ignore it, and clean it up on `make clean'.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
One test case checked the stdout and stderr of 'git add' by constructing a
single 'expect' file that contained both streams. But when the command
runs, the order of stdout and stderr output is unpredictable because it
depends on how the streams are buffered. At least on Windows, the buffering
is different from what the test case expected. Hence, check the two output
texts separately.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Acked-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On systems with an echo which defaults to the XSI-conformant behavior
(Solaris, or others using Ksh), echo will interpret certain backslashed
characters as control sequences. This can cause a problem for interactive
rebase when it is used to rebase commits whose commit "subject" (the first
line) contains any of these backslashed sequences. In this case, echo will
substitute the control sequence for the backslashed characters and either
the rebased commit message will differ from the original, or the rebase
process will fail. Neither is desirable.
So work around this issue by replacing the echo statements used to print
out portions of the commit message, with printf.
Also, add a test to test for this breakage.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Acked-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make sure git apply can apply patches with paths relative to the
toplevel of a work tree, a subdirectory, or within the repository
metadata directory.
Relative paths are broken for most commands when run from a
subdirectory of $GIT_DIR, "git apply" being no exception. The other
tests are meant to keep the demonstration of that company.
Based on a test by Duy.
Cc: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Tweak the style of these tests to make them easier to read.
- Replace test_rev_parse() which produced multiple mini-tests with a
simple function that can be used with the test body.
- Combine multiple mini-tests into larger chunks that are easier
to read.
- Do not hard-code object IDs. We may use a different hash some day.
- Use test_cmp in preference to the test builtin. The former
produces useful output when tests are run with the "-v" option.
- Guard all test code with test_expect_success. This makes it much
easier to visually scan through the test and find code of interest.
- Use subshells to make the current directory easier to track.
Outside of any subshell, the current directory is always
$TEST_DIRECTORY now.
Also add a new test demonstrating a possible bug noticed in the
process of cleaning up: “git rev-parse --show-prefix” leaves out
the trailing newline after an empty prefix when cwd is at the
toplevel of the work tree.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 9d2e942 (decode file:// and ssh:// URLs, 2010-05-23) the URL
logic unquotes escaped URLs. For the %2B type of escape, this is
conformant with RFC 2396. However, it also unquotes + into a space
character, which is only appropriate for the query strings in HTTP.
This notably broke fetching from the gtk+ repository.
We cannot just remove the corresponding code since the same
url_decode_internal() is also used by the HTTP backend to decode query
parameters. Introduce a new argument that controls whether the +
decoding happens, and use it only in the (client-side) url_decode().
Reported-by: Jasper St. Pierre <jstpierre@mecheye.net>
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint-1.6.6:
request-pull.txt: Document -p option
Check size of path buffer before writing into it
rev-parse: fix --parse-opt --keep-dashdash --stop-at-non-option
* maint-1.6.5:
request-pull.txt: Document -p option
Check size of path buffer before writing into it
rev-parse: fix --parse-opt --keep-dashdash --stop-at-non-option
