Adapt reftable basics test file to clar by using clar assertions
where necessary.Break up test edge case to improve modularity and
clarity.
Signed-off-by: Seyi Kuforiji <kuforiji98@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Helper functions defined in `t/unit-tests/lib-reftable.{c,h}` are
required for the reftable-related test files to run. In the current
implementation these functions are designed to conform with our
homegrown unit-testing structure. So in other to convert the reftable
test files, there is need for a clar specific implementation of these
helper functions.
Implement equivalent helper functions in `lib-reftable-clar.{c,h}` to
use clar. These functions conform with the clar testing framework and
become available for all reftable-related test files implemented using
the clar testing framework, which requires them. This will be used by
subsequent commits.
Signed-off-by: Seyi Kuforiji <kuforiji98@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
After we write to the output file, the program exits. This naturally
closes the descriptor. But we should do an explicit close for two
reasons:
1. It's possible to hit an error on close(), which we should detect
and report via our exit code.
2. Leaking descriptors is a bad practice in general. Even if it isn't
meaningful here, it sets a bad example.
It is tempting to write:
if (write_in_full(fd, ...) < 0 || close(fd) < 0)
die_errno(...);
But that pattern contains a subtle problem that has resulted in
descriptor leaks before. If write_in_full() fails, we'll short-circuit
and never call close(), leaking the descriptor.
That's not a problem here, since our error path dies instead of
returning up the stack. But since we're trying to set a good example,
let's write it out as two separate conditions. As a bonus, that lets us
produce a slightly more specific error message.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We want to read the whole contents of two files into memory. If we
switch from raw ptr/len pairs to strbufs, we can use strbuf_read_file()
to shorten the code.
This incidentally fixes two small bugs:
1. We stat() the files and allocate our buffers based on st.st_size.
But that is an off_t which may be larger than the size_t we'd use
to allocate. We should use xsize_t() to do a checked conversion.
Otherwise integer truncation (on a file >4GB) could cause us to
under-allocate (though in practice this does not result in a buffer
overflow because the same truncation happens when read_in_full()
also takes a size_t).
2. We get the size from st.st_size, and then try to read_in_full()
that many bytes. But it may return fewer bytes than expected (if
the file changed racily and we get an early EOF), leading us to
read uninitialized bytes in the allocated buffer. We don't notice
because we only check the value for error, not that we got the
expected number of bytes.
The strbuf code doesn't run into this, because it just reads to EOF,
expanding the buffer dynamically as necessary. Neither bug is a big deal
for a test helper, but fixing them is a nice bonus on top of simplifying
the code.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is a short test helper that does all of its work in the main
function. When we encounter an error, we try to clean up memory and
descriptors and then jump to an error return, which exits the program.
We can get the same effect by just calling die(), which means we do not
have to bother with cleaning up. This simplifies the code, and also
removes some inconsistencies where a few code paths forgot to clean up
descriptors (though in practice it was not a big deal since we were
exiting anyway).
In addition to die() and die_errno(), we'll also use a few of our usual
helpers like xopen() and usage() that make things more ergonomic.
This does change the exit code in these cases from 1 to 128, but I
don't think it matters (and arguably is better, as we'd already exit 128
for other errors like xmalloc() failure).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Due to portability concerns, we do not blindly say "It is in [[this
standard]], so we will make liberal use of it" for many features,
and use of C99 language features follow this same principle. When
we contemplate adopting a language feature that we haven't used in
our codebase, we typically first raise a test balloon, which
- is a piece of code that exercises the language feature we are
trying to see if it is OK to adopt
- is in a small section of code that we know everybody who cares
about having a working Git must be compiling
- is in a fairly stable part of the code, to allow reverting it
easily if some platforms do not understand it yet.
After a few years, with no breakage report from the community, we'd
declare that the feature is now safe to use in our codebase. Before
that, we forbid the use of the language construct except for the
designated test balloon code site.
The CodingGuidelines document lists these selected features that we
already have determined that they are safe, and also those features
that we know some platforms had trouble with.
Let's also start listing ongoing test balloons and expected timeline
for adoption. Recently phillip proposed to adopt the syntax to
spell a structure literally (i.e. compound literal) with a new test
balloon, which Patrick made redundant by pointing out an existing
one we had already.but without documenting it. Start the new section
with an entry for that test balloon.
Helped-by: Patrick Steinhardt <ps@pks.im>
Helped-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Clean up the way how signature on commit objects are exported to
and imported from fast-import stream.
* cc/fast-import-export-signature-names:
fast-(import|export): improve on commit signature output format
Our <sane-ctype.h> header file relied on that the system-supplied
<ctype.h> header is not later included, which would override our
macro definitions, but "amazon linux" broke this assumption. Fix
this by preemptively including <ctype.h> near the beginning of
<sane-ctype.h> ourselves.
* ps/sane-ctype-workaround:
sane-ctype: fix compiler error on Amazon Linux 2
Lift the limitation to use changed-path filter in "git log" so that
it can be used for a pathspec with multiple literal paths.
* ly/changed-paths-traversal:
bloom: optimize multiple pathspec items in revision
revision: make helper for pathspec to bloom keyvec
bloom: replace struct bloom_key * with struct bloom_keyvec
bloom: rename function operates on bloom_key
bloom: add test helper to return murmur3 hash
There are a couple of -Wsign-compare warnings in "config.c":
- `prepare_include_condition_pattern()` is returns a signed integer,
where it either returns a negative error code or the index of the
last dir separator in a path. That index will always be a
non-negative number, but we cannot just change the return type to a
`size_t` due to it being re-used as error code. This is fixed by
splitting up concerns: the return value is only used as error code,
and the prefix is now returned via an out-pointer. This fixes a sign
comparison warning when comparing `text.len < prefix`,
- We treat `struct config_store_data::seen` as signed integer in
several places even though it's unsigned.
- There are multiple trivial sign comparison warnings where we use a
signed loop index to iterate through an unsigned number of items.
Fix all of these issues and drop the `DISABLE_SIGN_COMPARE_WARNINGS`
macro.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In "config.c" we host both the business logic to read and write config
files as well as the logic to parse specific Git-related variables. On
the one hand this is mixing concerns, but even more importantly it means
that we cannot easily remove the dependency on `the_repository` in our
config parsing logic.
Move the logic into "environment.c". This file is a grab bag of all
kinds of global state already, so it is quite a good fit. Furthermore,
it also hosts most of the global variables that we're parsing the config
values into, making this an even better fit.
Note that there is one hidden change: in `parse_fsync_components()` we
use an `int` to iterate through `ARRAY_SIZE(fsync_component_names)`. But
as -Wsign-compare warnings are enabled in this file this causes a
compiler warning. The issue is fixed by using a `size_t` instead.
This change allows us to drop the `USE_THE_REPOSITORY_VARIABLE`
declaration.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove the last couple of wrapper functions that implicitly depend on
`the_repository`.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 036876a1067 (config: hide functions using `the_repository` by
default, 2024-08-13) we have moved around a bunch of functions in the
config subsystem that depend on `the_repository`. Those function have
been converted into mere wrappers around their equivalent function that
takes in a repository as parameter, and the intent was that we'll
eventually remove those wrappers to make the dependency on the global
repository variable explicit at the callsite.
Follow through with that intent and remove `git_config_set_multivar()`.
All callsites are adjusted so that they use
`repo_config_set_multivar(the_repository, ...)` instead. While some
callsites might already have a repository available, this mechanical
conversion is the exact same as the current situation and thus cannot
cause any regression. Those sites should eventually be cleaned up in a
later patch series.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 036876a1067 (config: hide functions using `the_repository` by
default, 2024-08-13) we have moved around a bunch of functions in the
config subsystem that depend on `the_repository`. Those function have
been converted into mere wrappers around their equivalent function that
takes in a repository as parameter, and the intent was that we'll
eventually remove those wrappers to make the dependency on the global
repository variable explicit at the callsite.
Follow through with that intent and remove
`git_config_get_multivar_gently()`. All callsites are adjusted so that
they use `repo_config_get_multivar_gently(the_repository, ...)` instead.
While some callsites might already have a repository available, this
mechanical conversion is the exact same as the current situation and
thus cannot cause any regression. Those sites should eventually be
cleaned up in a later patch series.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 036876a1067 (config: hide functions using `the_repository` by
default, 2024-08-13) we have moved around a bunch of functions in the
config subsystem that depend on `the_repository`. Those function have
been converted into mere wrappers around their equivalent function that
takes in a repository as parameter, and the intent was that we'll
eventually remove those wrappers to make the dependency on the global
repository variable explicit at the callsite.
Follow through with that intent and remove
`git_config_set_multivar_in_file_gently()`. All callsites are adjusted
so that they use
`repo_config_set_multivar_in_file_gently(the_repository, ...)` instead.
While some callsites might already have a repository available, this
mechanical conversion is the exact same as the current situation and
thus cannot cause any regression. Those sites should eventually be
cleaned up in a later patch series.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 036876a1067 (config: hide functions using `the_repository` by
default, 2024-08-13) we have moved around a bunch of functions in the
config subsystem that depend on `the_repository`. Those function have
been converted into mere wrappers around their equivalent function that
takes in a repository as parameter, and the intent was that we'll
eventually remove those wrappers to make the dependency on the global
repository variable explicit at the callsite.
Follow through with that intent and remove
`git_config_set_in_file_gently()`. All callsites are adjusted so that
they use `repo_config_set_in_file_gently(the_repository, ...)` instead.
While some callsites might already have a repository available, this
mechanical conversion is the exact same as the current situation and
thus cannot cause any regression. Those sites should eventually be
cleaned up in a later patch series.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 036876a1067 (config: hide functions using `the_repository` by
default, 2024-08-13) we have moved around a bunch of functions in the
config subsystem that depend on `the_repository`. Those function have
been converted into mere wrappers around their equivalent function that
takes in a repository as parameter, and the intent was that we'll
eventually remove those wrappers to make the dependency on the global
repository variable explicit at the callsite.
Follow through with that intent and remove `git_config_set()`. All
callsites are adjusted so that they use `repo_config_set(the_repository,
...)` instead. While some callsites might already have a repository
available, this mechanical conversion is the exact same as the current
situation and thus cannot cause any regression. Those sites should
eventually be cleaned up in a later patch series.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 036876a1067 (config: hide functions using `the_repository` by
default, 2024-08-13) we have moved around a bunch of functions in the
config subsystem that depend on `the_repository`. Those function have
been converted into mere wrappers around their equivalent function that
takes in a repository as parameter, and the intent was that we'll
eventually remove those wrappers to make the dependency on the global
repository variable explicit at the callsite.
Follow through with that intent and remove `git_config_set_gently()`.
All callsites are adjusted so that they use
`repo_config_set_gently(the_repository, ...)` instead. While some
callsites might already have a repository available, this mechanical
conversion is the exact same as the current situation and thus cannot
cause any regression. Those sites should eventually be cleaned up in a
later patch series.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 036876a1067 (config: hide functions using `the_repository` by
default, 2024-08-13) we have moved around a bunch of functions in the
config subsystem that depend on `the_repository`. Those function have
been converted into mere wrappers around their equivalent function that
takes in a repository as parameter, and the intent was that we'll
eventually remove those wrappers to make the dependency on the global
repository variable explicit at the callsite.
Follow through with that intent and remove `git_config_set_in_file()`.
All callsites are adjusted so that they use
`repo_config_set_in_file(the_repository, ...)` instead. While some
callsites might already have a repository available, this mechanical
conversion is the exact same as the current situation and thus cannot
cause any regression. Those sites should eventually be cleaned up in a
later patch series.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 036876a1067 (config: hide functions using `the_repository` by
default, 2024-08-13) we have moved around a bunch of functions in the
config subsystem that depend on `the_repository`. Those function have
been converted into mere wrappers around their equivalent function that
takes in a repository as parameter, and the intent was that we'll
eventually remove those wrappers to make the dependency on the global
repository variable explicit at the callsite.
Follow through with that intent and remove `git_config_get_bool()`. All
callsites are adjusted so that they use
`repo_config_get_bool(the_repository, ...)` instead. While some
callsites might already have a repository available, this mechanical
conversion is the exact same as the current situation and thus cannot
cause any regression. Those sites should eventually be cleaned up in a
later patch series.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 036876a1067 (config: hide functions using `the_repository` by
default, 2024-08-13) we have moved around a bunch of functions in the
config subsystem that depend on `the_repository`. Those function have
been converted into mere wrappers around their equivalent function that
takes in a repository as parameter, and the intent was that we'll
eventually remove those wrappers to make the dependency on the global
repository variable explicit at the callsite.
Follow through with that intent and remove `git_config_get_ulong()`. All
callsites are adjusted so that they use
`repo_config_get_ulong(the_repository, ...)` instead. While some
callsites might already have a repository available, this mechanical
conversion is the exact same as the current situation and thus cannot
cause any regression. Those sites should eventually be cleaned up in a
later patch series.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 036876a1067 (config: hide functions using `the_repository` by
default, 2024-08-13) we have moved around a bunch of functions in the
config subsystem that depend on `the_repository`. Those function have
been converted into mere wrappers around their equivalent function that
takes in a repository as parameter, and the intent was that we'll
eventually remove those wrappers to make the dependency on the global
repository variable explicit at the callsite.
Follow through with that intent and remove `git_config_get_int()`. All
callsites are adjusted so that they use
`repo_config_get_int(the_repository, ...)` instead. While some callsites
might already have a repository available, this mechanical conversion is
the exact same as the current situation and thus cannot cause any
regression. Those sites should eventually be cleaned up in a later patch
series.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 036876a1067 (config: hide functions using `the_repository` by
default, 2024-08-13) we have moved around a bunch of functions in the
config subsystem that depend on `the_repository`. Those function have
been converted into mere wrappers around their equivalent function that
takes in a repository as parameter, and the intent was that we'll
eventually remove those wrappers to make the dependency on the global
repository variable explicit at the callsite.
Follow through with that intent and remove `git_config_get_string()`.
All callsites are adjusted so that they use
`repo_config_get_string(the_repository, ...)` instead. While some
callsites might already have a repository available, this mechanical
conversion is the exact same as the current situation and thus cannot
cause any regression. Those sites should eventually be cleaned up in a
later patch series.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 036876a1067 (config: hide functions using `the_repository` by
default, 2024-08-13) we have moved around a bunch of functions in the
config subsystem that depend on `the_repository`. Those function have
been converted into mere wrappers around their equivalent function that
takes in a repository as parameter, and the intent was that we'll
eventually remove those wrappers to make the dependency on the global
repository variable explicit at the callsite.
Follow through with that intent and remove `git_config_get_string()`.
All callsites are adjusted so that they use
`repo_config_get_string(the_repository, ...)` instead. While some
callsites might already have a repository available, this mechanical
conversion is the exact same as the current situation and thus cannot
cause any regression. Those sites should eventually be cleaned up in a
later patch series.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 036876a1067 (config: hide functions using `the_repository` by
default, 2024-08-13) we have moved around a bunch of functions in the
config subsystem that depend on `the_repository`. Those function have
been converted into mere wrappers around their equivalent function that
takes in a repository as parameter, and the intent was that we'll
eventually remove those wrappers to make the dependency on the global
repository variable explicit at the callsite.
Follow through with that intent and remove
`git_config_get_string_multi()`. All callsites are adjusted so that they
use `repo_config_get_string_multi(the_repository, ...)` instead. While
some callsites might already have a repository available, this
mechanical conversion is the exact same as the current situation and
thus cannot cause any regression. Those sites should eventually be
cleaned up in a later patch series.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 036876a1067 (config: hide functions using `the_repository` by
default, 2024-08-13) we have moved around a bunch of functions in the
config subsystem that depend on `the_repository`. Those function have
been converted into mere wrappers around their equivalent function that
takes in a repository as parameter, and the intent was that we'll
eventually remove those wrappers to make the dependency on the global
repository variable explicit at the callsite.
Follow through with that intent and remove `git_config_get_value()`. All
callsites are adjusted so that they use
`repo_config_get_value(the_repository, ...)` instead. While some
callsites might already have a repository available, this mechanical
conversion is the exact same as the current situation and thus cannot
cause any regression. Those sites should eventually be cleaned up in a
later patch series.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 036876a1067 (config: hide functions using `the_repository` by
default, 2024-08-13) we have moved around a bunch of functions in the
config subsystem that depend on `the_repository`. Those function have
been converted into mere wrappers around their equivalent function that
takes in a repository as parameter, and the intent was that we'll
eventually remove those wrappers to make the dependency on the global
repository variable explicit at the callsite.
Follow through with that intent and remove `git_config_get_value()`. All
callsites are adjusted so that they use
`repo_config_get_value(the_repository, ...)` instead. While some
callsites might already have a repository available, this mechanical
conversion is the exact same as the current situation and thus cannot
cause any regression. Those sites should eventually be cleaned up in a
later patch series.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 036876a1067 (config: hide functions using `the_repository` by
default, 2024-08-13) we have moved around a bunch of functions in the
config subsystem that depend on `the_repository`. Those function have
been converted into mere wrappers around their equivalent function that
takes in a repository as parameter, and the intent was that we'll
eventually remove those wrappers to make the dependency on the global
repository variable explicit at the callsite.
Follow through with that intent and remove `git_config_get()`. All
callsites are adjusted so that they use `repo_config_get(the_repository,
...)` instead. While some callsites might already have a repository
available, this mechanical conversion is the exact same as the current
situation and thus cannot cause any regression. Those sites should
eventually be cleaned up in a later patch series.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 036876a1067 (config: hide functions using `the_repository` by
default, 2024-08-13) we have moved around a bunch of functions in the
config subsystem that depend on `the_repository`. Those function have
been converted into mere wrappers around their equivalent function that
takes in a repository as parameter, and the intent was that we'll
eventually remove those wrappers to make the dependency on the global
repository variable explicit at the callsite.
Follow through with that intent and remove `git_config_clear()`. All
callsites are adjusted so that they use
`repo_config_clear(the_repository, ...)` instead. While some callsites
might already have a repository available, this mechanical conversion is
the exact same as the current situation and thus cannot cause any
regression. Those sites should eventually be cleaned up in a later patch
series.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 036876a1067 (config: hide functions using `the_repository` by
default, 2024-08-13) we have moved around a bunch of functions in the
config subsystem that depend on `the_repository`. Those function have
been converted into mere wrappers around their equivalent function that
takes in a repository as parameter, and the intent was that we'll
eventually remove those wrappers to make the dependency on the global
repository variable explicit at the callsite.
Follow through with that intent and remove `git_config()`. All callsites
are adjusted so that they use `repo_config(the_repository, ...)`
instead. While some callsites might already have a repository available,
this mechanical conversion is the exact same as the current situation
and thus cannot cause any regression. Those sites should eventually be
cleaned up in a later patch series.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
find_cfg_ent() allocates a struct reflog_expire_entry_option via
FLEX_ALLOC_MEM and inserts it into a linked list in the
reflog_expire_options structure. The entries in this list are never
freed, resulting in a leak in cmd_reflog_expire and the gc reflog expire
maintenance task:
Direct leak of 39 byte(s) in 1 object(s) allocated from:
#0 0x7ff975ee6883 in calloc (/lib64/libasan.so.8+0xe6883)
#1 0x0000010edada in xcalloc ../wrapper.c:154
#2 0x000000df0898 in find_cfg_ent ../reflog.c:28
#3 0x000000df0898 in reflog_expire_config ../reflog.c:70
#4 0x00000095c451 in configset_iter ../config.c:2116
#5 0x0000006d29e7 in git_config ../config.h:724
#6 0x0000006d29e7 in cmd_reflog_expire ../builtin/reflog.c:205
#7 0x0000006d504c in cmd_reflog ../builtin/reflog.c:419
#8 0x0000007e4054 in run_builtin ../git.c:480
#9 0x0000007e4054 in handle_builtin ../git.c:746
#10 0x0000007e8a35 in run_argv ../git.c:813
#11 0x0000007e8a35 in cmd_main ../git.c:953
#12 0x000000441e8f in main ../common-main.c:9
#13 0x7ff9754115f4 in __libc_start_call_main (/lib64/libc.so.6+0x35f4)
#14 0x7ff9754116a7 in __libc_start_main@@GLIBC_2.34 (/lib64/libc.so.6+0x36a7)
#15 0x000000444184 in _start (/home/jekeller/libexec/git-core/git+0x444184)
Close this leak by adding a reflog_clear_expire_config() function which
iterates the linked list and frees its elements. Call it upon exit of
cmd_reflog_expire() and reflog_expire_condition().
Add a basic test which covers this leak. While at it, cover the
functionality from commit commit 3cb22b8efe (Per-ref reflog expiry
configuration, 2008-06-15). We've had this support for years, but lacked
any tests.
Co-developed-by: Jeff King <peff@peff.net>
Signed-off-by: Jacob Keller <jacob.keller@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a resource leak where the file descriptor was not closed after
truncating a file in t/helper/test-truncate.c.
Signed-off-by: Hoyoung Lee <lhywkd22@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* 'master' of https://github.com/j6t/gitk: (21 commits)
gitk: remove header of now empty section "General options"
gitk: separate upstream refs when using the sort-by-type option
gitk: make 'sort-refs-by-type' optional and persistent
gitk: sort by ref type on the 'tags and heads' view
gitk: choosefont - remove a stray debugging line
gitk: allow horizontal commit-graph scrolling
gitk: update aqua scrolling for TclTk 8.6 / TIP171
gitk: update x11 scrolling for TclTk 8.6 / TIP 171
gitk: update win32 scrolling for Tk 8.6 / TIP 171
gitk: mousewheel scrolling functions for Tk 8.6
gitk: wheel scrolling multiplier preference
gitk: separate x11 / win32 / aqua Mouse bindings
gitk: remove non-ttk support code
gitk: replace ${NS} with ttk
gitk: always use themed Tk (ttk)
gitk: use $config_variables as list for save/restore
gitk: remove implementations for Tcl/Tk < 8.6
gitk: Make TclTk 8.6 the minimum, allow 8.7
gitk: remove code targeting git <= 1.7.2
gitk: require git >= 2.20
...
These cases cover scenarios where `gpg.program` is set as a program in
`$PATH` or as a path relative to the user's home directory.
Signed-off-by: Jonas Brandstötter <jonas.brandstoetter@gmx.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
An earlier commit remove the only option that was available under
"General options". We don't need the header for the empty section.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
git-gui has many instances of '-translation binary' and '-encoding
$SOMETHING' on the same channel. As eofchar is always null given a
prior commit, the net effect of having '-translation binary' in such
configuration is only to change how text line endings are handled.
For cases where the channel is opened to be consumed via gets, the eol
translation is irrelevant because Tcl's gets is documented to recognize
any of \n, \r, and \r\n as a line ending. So, keep only the '-encoding
$SOMETHING' configuration in these cases, making the configuration more
clear.
Signed-off-by: Mark Levedahl <mlevedahl@gmail.com>
git-gui currently configures some channels as '-encoding binary' when
the channel is not really binary (e.g, the channel is consumed as lines
of text). In 8.6, '-encoding binary' is an alias for '-encoding
iso8859), but TIP 699 removes this alias for Tcl 9.0. Let's switch to
'-encoding iso8859-1' to be compatible across Tcl versions.
Signed-off-by: Mark Levedahl <mlevedahl@gmail.com>
git-gui has many cases where -translation binary and -encoding binary
are configured on the same channel. But, -translation binary defines a
binary channel, which sets up -encoding iso8859-1 as part of its work.
Tcl 8.x defines -encoding binary as an alias of -encoding iso8859-1, and
this alias is deleted in Tcl 9.0. Let's delete the redundant encoding
definition now.
Signed-off-by: Mark Levedahl <mlevedahl@gmail.com>
Per 6eb420ef61 ("git-gui: Always disable the Tcl EOF character when
reading", 2007-07-17), git-gui should disable Tcl's EOF character
detection on all files when on Windows: the default is disabled on all
other platforms (and with Tcl 9.0, is disabled on Windows too). This
EOF character is for compatibility with files / applications written for
file systems that know only the disc sectors allocated, and not the
number of bytes used. This has nothing to do with git.
But, git-gui does not set -eofchar {} on all channels. To avoid any
further leakage, let's just add this to the Windows specific override of
open. This override is needed only as long as Tcl 8.x is in use (Tcl
9.0 makes -eofchar {} default on all platforms).
Signed-off-by: Mark Levedahl <mlevedahl@gmail.com>
* mr/sort-refs-by-type:
gitk: separate upstream refs when using the sort-by-type option
gitk: make 'sort-refs-by-type' optional and persistent
gitk: sort by ref type on the 'tags and heads' view
The output `git imap-send --list` command can be a bit confusing for new
users since the IMAP LIST command output is very verbose. Help such users
to analyse the same by using an example output.
Signed-off-by: Aditya Garg <gargaditya08@live.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Optimize pop_most_recent_commit() by adding the first parent using the
more efficient prio_queue_peek() and prio_queue_replace() instead of
prio_queue_get() and prio_queue_put().
On my machine this neutralizes the performance hit it took in Git's own
repository when we converted it to prio_queue two patches ago (git_pq):
$ hyperfine -w3 -L git ./git_2.50.1,./git_pq,./git '{git} rev-parse :/^Initial.revision'
Benchmark 1: ./git_2.50.1 rev-parse :/^Initial.revision
Time (mean ± σ): 1.073 s ± 0.003 s [User: 1.053 s, System: 0.019 s]
Range (min … max): 1.069 s … 1.078 s 10 runs
Benchmark 2: ./git_pq rev-parse :/^Initial.revision
Time (mean ± σ): 1.077 s ± 0.002 s [User: 1.057 s, System: 0.018 s]
Range (min … max): 1.072 s … 1.079 s 10 runs
Benchmark 3: ./git rev-parse :/^Initial.revision
Time (mean ± σ): 1.069 s ± 0.003 s [User: 1.049 s, System: 0.018 s]
Range (min … max): 1.065 s … 1.074 s 10 runs
Summary
./git rev-parse :/^Initial.revision ran
1.00 ± 0.00 times faster than ./git_2.50.1 rev-parse :/^Initial.revision
1.01 ± 0.00 times faster than ./git_pq rev-parse :/^Initial.revision
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a function to replace the top element of the queue that basically
does the same as prio_queue_get() followed by prio_queue_put(), but
without the work by prio_queue_get() to rebalance the heap. It can be
used to optimize loops that get one element and then immediately add
another one. That's common e.g., with commit history traversal, where
we get out a commit and then put in its parents.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
pop_most_recent_commit() calls commit_list_insert_by_date() for parent
commits, which is itself called in a loop. This can lead to quadratic
complexity if there are many merges. Replace the commit_list with a
prio_queue to ensure logarithmic worst case complexity and convert all
three users.
Add a performance test that exercises one of them using a pathological
history that consists of 50% merges and 50% root commits to demonstrate
the speedup:
Test v2.50.1 HEAD
----------------------------------------------------------------------
1501.2: rev-parse ':/65535' 2.48(2.47+0.00) 0.20(0.19+0.00) -91.9%
Alas, sane histories don't benefit from the conversion much, and
traversing Git's own history takes a 1% performance hit on my machine:
$ hyperfine -w3 -L git ./git_2.50.1,./git '{git} rev-parse :/^Initial.revision'
Benchmark 1: ./git_2.50.1 rev-parse :/^Initial.revision
Time (mean ± σ): 1.071 s ± 0.004 s [User: 1.052 s, System: 0.017 s]
Range (min … max): 1.067 s … 1.078 s 10 runs
Benchmark 2: ./git rev-parse :/^Initial.revision
Time (mean ± σ): 1.079 s ± 0.003 s [User: 1.060 s, System: 0.017 s]
Range (min … max): 1.074 s … 1.083 s 10 runs
Summary
./git_2.50.1 rev-parse :/^Initial.revision ran
1.01 ± 0.00 times faster than ./git rev-parse :/^Initial.revision
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
